How to find your furnace filter size
Your filter size is three numbers, length x width x depth in inches, such as 20x25x1. Here's how to find them in under five minutes.
1. Find the filter
Most homes have the filter in one of these places:
- A slot in the furnace or air handler, usually where the big return duct enters the cabinet. Look for a removable cover or a thin door on the side or bottom of the unit.
- Behind a return-air grille on a wall or ceiling. These grilles are larger than supply vents and often have latches or tabs. Some homes have more than one, each with its own filter (and sometimes different sizes).
- A media cabinet beside the furnace that holds a thicker 4- or 5-inch filter.
Turn the system off at the thermostat before you pull the filter out.
2. Read the size on the frame
The cardboard edge of nearly every filter has the size printed on it. The big bold numbers are the nominal size, the rounded size you search for when buying. Many filters also show the smaller actual size. For example, a filter sold as 16x25x1 typically measures 15-1/2 x 24-1/2 x 3/4 inches. See nominal vs. actual size for why.
Write the size down somewhere you'll find it next time, such as on the furnace cabinet with a marker or in your phone's notes.
3. No label? Measure it
- Measure the old filter's length and width to the nearest 1/8 inch, and its thickness (depth).
- If there is no old filter, measure the slot or grille opening instead.
- Round up to the nearest whole inch to get the likely nominal size. A filter measuring 19-1/2 x 24-1/2 x 3/4 is a 20x25x1.
- Check your result against the size chart. If your numbers don't match any standard size, you may need a custom-size filter, ordered by exact (actual) dimensions.
4. Check the fit and direction
A correctly sized filter slides in without bending and doesn't leave visible gaps around the edges. Filters have an arrow on the frame showing airflow direction. Point it toward the furnace or air handler (away from the return grille).
5. Pick the type and change interval
Once you have the size, choose a MERV rating your system can handle (see MERV ratings explained) and set a reminder to check it monthly.
Where to buy
Standard sizes are sold at hardware stores and online. Some options: Filterbuy (sells by nominal size, including many depths), Honeywell Home, Filtrete, or Amazon. Search by your exact nominal size and depth.